Posted by seldom seen slim on August 24, 2001 at 18:24:07:
In Reply to: Re: A piece of advice on Hydro's posted by Jeff B on August 24, 2001 at 17:19:29:
The key is most retesters will not or cannot do the calculation for the + rating and therefore omit the plus stamp. I have provided you a retester that will do the math.
Here are the regs, it is a requirement:
>>>(5) That a plus sign (+) be added following the test date marking on the cylinder to indicate compliance with paragraphs (c) (2), (3), and (4) of this section.<<<<
From the Code of Federal Regulations at http://63.141.231.97/cgi-bin/om_isapi.dll?advquery=%5bHeadings%20Section%2c173.302%5d&infobase=netdot&record={31D8}&recordswithhits=on&softpage=Document42
You need to follow the page arrow and then go to 173.302 paragraph (c)
(1) (2), (3), and (4) of the section.