Posted by mike on November 29, 2001 at 23:58:05:
In Reply to: My first steel posted by Jeff Shaw on November 29, 2001 at 23:36:54:
you could get the cubic footage in the tanks by looking at the pressure and then doing the math. Will they be filled to 2250 or 2400 or 2640?
If they're filled to 2400 then you should have close to 70 cu ft, which will be a good 10% less than what you're used to. Be careful and keep an eye on that gauge. A buddy of mine ran low when he was borrowing one of my 72s and had to ascend a little faster than normal (he was used to Al80s).