Posted by tecdiver on June 20, 2002 at 15:31:54:
In Reply to: Re: Tank position posted by shirley on June 20, 2002 at 15:06:06:
You are looking at two cylinders say low pressure steel 40 cf, with a cross bar and one valve. You will need either hard or soft bands hard are more secure. A very rough guess would be around 700 to 800. If you look around you might find someone selling. If this does not seem good for you, try a Scuba Pro 71.4 it fills to 3300psi but the size is 7.25D and 24" from valve to base full you should roughly get what a alum 80 gives you. Price is around 370 with valve.