Corrosion

dive-instructors.com, the first place to look for a dive instructor

[ Follow Ups ] [ Post Followup ] [ California Scuba Diving BBS ] [ FAQ ]

Posted by Elaine on January 30, 2005 at 14:50:48:

I am cleaning all of my camera equipment. My Sea&Sea strobes have not been taken off the arm mounting adaptors for a little too long and I can't get the screws to budge. Is must have some corrosion in there. Any suggestions? I've tried some 3 in 1 but it isn't working.

Follow Ups:

Elaine, here's what you do... Eric S 09:29:54 01/31/05 (3)
- Re: Elaine, here's what you do... Stephen Clark 10:38:52 01/31/05 (2)
  - Lanocote! Yes, thank you Eric S 18:24:16 01/31/05 (0)
  - Re: Elaine, here's what you do... Elaine 13:16:44 01/31/05 (0)
Re: Corrosion Chris 15:01:52 01/30/05 (13)
- Re: Corrosion Chuck Tribolet 18:33:20 01/30/05 (11)
  - Re: Corrosion Chris 21:41:51 01/30/05 (8)
    - Dow 111 Chuck Tribolet 07:48:52 01/31/05 (1)
      - Re: Dow 111 Question Elaine 23:42:09 01/31/05 (0)
    - Re: Corrosion Elaine 21:52:09 01/30/05 (5)
      - Re: Corrosion Stephen Clark 22:09:36 01/30/05 (4)
        
        Re: Corrosion Chris 22:38:33 01/30/05 (3)
        
        OK, what do I do..... Elaine 22:55:37 01/30/05 (2)
        
        Re: OK, what do I do..... chris 23:15:50 01/30/05 (1)
        
        Back out of the bag OK 23:30:41 01/30/05 (0)
  - Re: Corrosion Elaine 18:48:29 01/30/05 (1)
    - On second thought Elaine 18:59:54 01/30/05 (0)
- Thanks, I won't give up yet Elaine 15:39:12 01/30/05 (0)

Post a Followup