Posted by Chuck Tribolet on January 30, 2005 at 18:33:20:
In Reply to: Re: Corrosion posted by Chris on January 30, 2005 at 15:01:52:
Liquid Wrench is better for this than WD-40. But
I'd be worried about using either one around plastic.
This stuff should be disassembled and soaked at the
end of each dive week/weekend.
I'd suggest coating the screws with Dow-Corning
111 before reassembling. You can get it from
http://www.mcmaster.com
http://www.grainger.com
http://www.scubatools.com
Scubatools sells it in a plastic syringe which is
really handy. Don't worry about the quantity,
a couple of ounces will last the rest of your life.
Chuck