|Here's What I Did|
Posted by tleemay on August 23, 2007 at 22:46:09:|
In Reply to: Make the wall thinner posted by c2cDiver on August 19, 2007 at 08:53:03:
13 cft pony bottle (or an alum 80) with an old Oceanic Delta 2 1st stage tuned to pass 135 psi. Took 250 psi rated nylon reinforced and braided hose to a replacement male regulator nipple. in the middle I placed inline with 3/3" NPT quick disconnects to a 12 solenoid air pressure switch. The business end of the length NPT connects to a 1963 Spartan Twin Horn from an old 10 ton International dump truck. I had all the hose to connector fittings pressure crimped at Long Beach Hydraulic Controls for $5 per fitting.
Hit the solednoid switch on the 405, people get out of your way.
With the 1/4" NPT, I can hook up my nail or brad gun, air wrench and chisel as well as the horn.
|Optional Link URL:|
|Optional Link Title:|
|Optional Image URL:|
|Post Background Color:||White Black|
|Post Area Page Width:||Normal Full|
|You must type in the
scrambled text key to
This is required to
help prevent spam bots
from flooding this BBS.