Re: "bungee" straps

AquaFlite Custom Wetsuits, Dive Skins, and Dive Parkas

[ Follow Ups ] [ Post Followup ] [ California Scuba Diving BBS ] [ FAQ ]

Posted by ptf on August 31, 2001 at 09:09:49:

In Reply to: "bungee" straps posted by msblucow on August 31, 2001 at 08:51:33:

Be nice to MHK and he might cut some from a roll that he has.
Or you can go to REI and get it there.

Yes I have done the mod to a vyper. I pulled the vyper off of
a console and thuss I did not have the nifty difty SS holder.
I went to GSA Supply (which is now an ACE Hardware) in Long Beach,
They are on PCH about a block west of the 710 on the North side
of the street. In the back is a section of SS rod
I do not know of the diameter size but they had a piece that is
about 10 inches in length and fits snugly thrhough the mounting
holes for the wrist straps. I took a pair of needle nose pliers and
made some nice loops. the bungee is then knotted and is larger
than the loops.

I'd tell you about the the great Vyper/Cobra/Mosquito Interface that
I have made but so far I have one unhappy customer. On the flip
side JRM seems to be getting good use out of his!

ptf and that is my real initials too

Follow Ups:

Post a Followup




[ Follow Ups ] [ Post Followup ] [ California Scuba Diving BBS ] [ FAQ ]